CMAX2 313mm Ford Slider Kit
Got a Ford or Jeep on your mind? This Slider kit will get you the same great stuff as our other 313mm Slider Kits but with the Left drop FRONT axle and a set of 44 Dana covers front and back for the axles.
If you're building a big Ford Pickup, or a custom Jeep, this is the kit for you. CMAX2 brings proper proportions to the build with the ST2 axles, 13mm narrower compared to the usual SCX2 sizes. This brings the wheels in to the body for that proper scale truck look, and CMAX2 keeps the frame full length at 500mm long, 19.7 inches, with a straight and flat rear frame section to get you tons of clearance for mounts and flatbeds.
With this Slider Kit you get a giant pile of stuff to build... There's a complete set of Left drop Ford or Jeep Dana 44 ST2 axles from GCM, sporting Aluminum knuckles, 49deg steering Uni front shafts, 6 bolt lockers, and SCX2 compatible gearing. The center drivetrain includes our LRT2 Low Range Scale transmission and OverDrive Tcase, and we've paired it all together with a stainless steel link kit, steel center driveshafts, and oil filled shocks. It's a complete slider kit ready for you to build up!
Here's the downloadable assembly manual for CMAX2 >>CMAX2 Assembly Manual Download<<
All aluminum parts are black anodized, and hardware is black 12.9 tempered.
Includes:
1x ST2 Front Left drop axle set, complete with 3.75:1 high pinion gearing, all steel internals, aluminum knuckles
1x ST2 Steering link set for CMAX2
1x Front Link kit
1x Left rail and 1x Right rail, 500mm long, 19.7 inches
1x Track Bar mount
1x Front servo mount
2x front shock towers
2x Front oil filled coil over shocks
1x Complete LRT2 OverDrive Tcase, scale transmission and motor mount plate
1x Front driveshaft
1x Rear driveshaft for 313mm wheelbase
1x Center Tcase mount for LRT2
1x Rear crossmember
2x Rear shock tower mounts
2x Rear oil filled coil over shocks
1x ST2 Rear centered axle set, complete with 3.75:1 high pinion gearing, all steel internals
1x 313mm rear link kit
all mounting hardware
