Strict Standards: Only variables should be assigned by reference in /var/www/vhosts/gcmachine.ca/httpdocs/ccdata/phppro/page.cls.php on line 218

Strict Standards: Only variables should be assigned by reference in /var/www/vhosts/gcmachine.ca/httpdocs/ccdata/data/product.inc.php on line 3

Strict Standards: Only variables should be assigned by reference in /var/www/vhosts/gcmachine.ca/httpdocs/ccdata/data/product.inc.php on line 4
design, prototype, production - All Stock Jeep JK

design, prototype, production

 
View Your Cart

There are no items in your cart.

 

All Stock Jeep JK

You are here: Welcome >> Articles >>
Strict Standards: Only variables should be assigned by reference in /var/www/vhosts/gcmachine.ca/httpdocs/ccdata/data/product.inc.php on line 404
Scale Truck and Offroad Builds >> All Stock Jeep JK
All Stock Jeep JK Image
Detail Image
Detail Image
Detail Image
Detail Image

This one is built on a CrossCanyon scaler conversion full kit, and stock axial axles and trans, a Robinson Racing machined 90t spur, 15t pinion, 35t motor, and stock esc from a HPI blitz, aiming for the easy trail machine with this one. There's a Towerpro servo in there, some BFG repro tires on 1.9 black axial rims also. With the small tire you'd think you'd get into jams on the rocks, but the chopped bumper gets you through surprisingly well. The fenders do get in the way in some cases, but the stocker side steps actually help a ton to get around corners and through ruts. It's a cool thing to see.. almost like sliders, that actually slide!
This one gets the GCM Panhard kit and some proline scaler 90mm shocks up front (shown with MRC shocks) and a new truss from GCM in there also. I chopped off the top of the truss and used it like a 3 link, thanks to the side hole for the upper link, and add to that the bent link- the front travel is massive and doesn't bind anywhere.
Here's some video of this rig:
Video link 1
And a Build Thread Link