Strict Standards: Only variables should be assigned by reference in /var/www/vhosts/gcmachine.ca/httpdocs/ccdata/phppro/page.cls.php on line 218

Strict Standards: Only variables should be assigned by reference in /var/www/vhosts/gcmachine.ca/httpdocs/ccdata/data/product.inc.php on line 3

Strict Standards: Only variables should be assigned by reference in /var/www/vhosts/gcmachine.ca/httpdocs/ccdata/data/product.inc.php on line 4
design, prototype, production - FlameRanch Ford

design, prototype, production

 
View Your Cart

There are no items in your cart.

 

FlameRanch Ford

You are here: Welcome >> Articles >>
Strict Standards: Only variables should be assigned by reference in /var/www/vhosts/gcmachine.ca/httpdocs/ccdata/data/product.inc.php on line 404
Scale Truck and Offroad Builds >> FlameRanch Ford
FlameRanch Ford Image
Detail Image
Detail Image
Detail Image

This Big Ford sports a full CrossCanyon scaler kit, a stock axial trans in the front, and a 35turn motor, and stock axial locked axles. We installed the proline 90mm shocks all outside the frame rails, the front with the stock dual rate (very soft) and 30 wt oil, and the rear with only the long spring, no dual rate spring (more stiff) and 30 oil.
In general the setup is very good, and it crawls very well also. Power comes through a Mamba Max ESC and 3s lipo, so with the 14/86 gearing it still has some rip, a good balance of speed and crawling ability.
The body has a couple of details added, including a winch. The body is mounted completely, but you can see no mounting hardware. The front section of the body clips around the winch fairlead, and the rear toolbox in the bed holds a bracket inside the body which screws to the frame rails. It's very solid, and has lasted a long time through countless hours of beating and trails.
Here's some video of this rig:
Video link 1
Video link 2
Video link 3
And a Build Thread Link