QUESTIONS:
If you have any questions, please send us a note at service (@) gcmachine.ca
The GCM RB3 platform was designed as a kit and full assembly instructions are included on this site. We are offering RB3 Kits in various forms. Please see the list below for the kit that will suit your needs. Each kit will be ordered only by e-mail and availability varies by components in stock.
Stage 1 Base Platform: $194. This includes the following:
Chassis side plates, internal battery tray, upper steering mount, servo mounts, required hex hardware.
Center Dogbones and drive cups for E-Savage center gearbox components.
__________________________________________________________________________________________________________________
Stage 2 Roller Platform: $670. This includes the following:
Chassis side plates, internal battery tray, upper steering mount, servo mounts, required hex hardware.
Center Dogbones and drive cups for E-Savage center gearbox components.
Front and Rear E-Savage Differential cases and all components required to assemble front and rear TWINv2 differentials.
Lower Skid Plates, front and rear bumpers.
One full conversion suspension option, EXarm, RacerEX or SS Kit including inner suspension hinge pins and braces (purple HPI color).
__________________________________________________________________________________________________________________
Stage 3 ARTR Platform: $870. This includes the following:
Chassis side plates, internal battery tray, upper steering mount, servo mounts, required hex hardware.
Center Dogbones and drive cups for E-Savage center gearbox components.
Front and Rear E-Savage Differential cases and all components required to assemble front and rear TWINv2 differentials.
Lower Skid Plates, front and rear bumpers.
One full conversion suspension option, EXarm, RacerEX or SS Kit including inner suspension hinge pins and braces (purple HPI color).
Full set of stock E-Savage steering knuckes, hubs, pins, GCM front Tierods, steering components, E-Savage center gearbox and dual motor plate (purple HPI color).
4 outer wheel bearings, E-Savage shock towers, 4 HPI aluminum shocks (purple HPI color) including black springs.
__________________________________________________________________________________________________________________
Stage 4 Plug and Play Platform: $1430. This includes the following:
Chassis side plates, internal battery tray, upper steering mount, servo mounts, required hex hardware.
Center Dogbones and drive cups for E-Savage center gearbox components.
Front and Rear E-Savage Differential cases and all components required to assemble front and rear TWINv2 differentials.
Lower Skid Plates, front and rear bumpers.
One full conversion suspension option, EXarm, RacerEX or SS Kit including inner suspension hinge pins and braces.
Full set of stock E-Savage steering knuckes, hubs, pins, GCM front Tierods, steering components, E-Savage center gearbox and single motor plate.
4 outer wheel bearings, E-Savage shock towers, 4 HPI aluminum shocks including black springs.
Medusa 36-50-3300v2-5 motor, Pinion gear. GCM red anodize heatsink.
Mamba Max ESC programmed and setup for 3s Lipo Battery supply, single Deans Connector installed.
GCM Friction Clutch Conversion, 66t Mod 0.8 spur gear installed.
Full SuperGlide Steering kit, HPI 17mm wheel Hex kit, Kyosho 10 spoke Rims in white or Chrome finish, and HPI Aggressor tires installed and NOT glued.
All HPI Metal components that would be purple are re-anodized to the RB3 red anodize color.
After assembly, the Stage 4 vehicle will require only reciever, steering servo, and battery to run.