Truss upper axle 4 link for AX-10 by GCM Racing.

The popular and very capable AX-10 rock crawlers by Axial Racing have taken over the world of R/C. Axial delivered a well made crawler with great geometry and a capable gearbox. GCM and many others are using this for a base to make even more cabable climbers with the addition of droop suspension, improved links and new mounting positions.

We have also found the need for more, smooth, bind-free travel when following the rocks. One way to help accomplish this is to convert the upper AX-10 'y' link to a dual-arm setup. The easiest way to mount your new upper links is with a GCM 4 link truss.

Here it is. It's a solid and space saving setup ready for action.

This link bolts directly to the AX-10 axle housing and uses the stock mounting hardware. It will host your upper links in a super stiff setup that is attached right through both axle halves, and will keep your axle positions solid. The mount also raises the pivot point about 3mm from the stock Y link location to help bring the center of motion towards the center of the truck. Depending on your link's other mounting positions this can help a lot with torque twist and other traction related problems.

The mounting position will let you have incredible wheel travel and you can easily set up pinion angles with no binding. Used on the front or rear, this is a great match for any 4 link suspension setup, and works perfectly with our frame mounted servo brackets as well.

Only available in black anodize finish.