GCM CrossCanyon Scaler Truck Combo Kit is shown here. VENOM Creeper or AXIAL conversions are available.

After entering the Rock Crawling arena with one of the many crawler kits, many drivers move to competition rigs and then to scale truck off-roading. For these drivers we have the perfect package for you.

Right from the start this design was engineered to fit, work well, and be light and low. As you can see from the above picture, even in the 3D design stage, the parts were designed to interlock on the CrossCanyon chassis as well as working perfectly in stand-alone applications. Each single component was intended for the custom builder, but here it's all offered in a single Combo package that works.

Introducing the GCM CrossCanyon Scale Truck Combo kit. This total kit will let you convert a Venom Creeper, SCX-10, Scorpion or AX-10 crawler into a ready to scale truck in no time. The CC Scaler kit comes with our front mount transmission-motor plate, the GCM transfer case, skidplate, servo mount, and CrossCanyon frame rails. All you have to do is swap in the crawler rig parts, setup your links to the body wheelbase, add scale shocks, and a scaler truck appears from the bench. These kits are designed specifically to use what you already have to assemble a great new scaler platform.

Motor Center position shown below:

Motor Forward position shown below:

As shown in the above pictures, the AXIAL front motor plate can be mounted in the motor-forward or motor-centered by simply installing the motor plate reversed. It's that easy! The geometry of the plate and the mounting holes in the CrossCanyon chassis allow for perfect shaft alignment with the Transfer Case input. The VENOM Creeper conversion kit allows for a rearward mounted motor and the same servo and T-Case setups as the AXIAL conversions. This level of setup adjustment lets you fit your components in enough positions to allow just about any body and interior fitment, or adjust for weight balance and transfer. Even the skidplate has mounting options to get the T-Case input on the correct side to match your setup. Shown below, the Servo mount plate can be used right or left bias, and can accept the servo on top for droop or high knuckle builds, or mount the servo below for short horn or sprung setups. In any case, the servo can be used to match the way you build so you can use your favorite setups on this simple platform.

The setup above shows AXIAL drive train equipment and a couple of build ideas as well as the CrossCanyon Scaler Combo Kit. This clearly shows the triangulation with the internal lower link mounting allowed by the CC Skidplate and the room available in the front for the shown rear-motor setup or a flipped mount for front mount setup. On a side note, this rear-motor setup still fits under the floorpan of our JK Jeep Brute build. The setup shown below is the VENOM Creeper Center trans and motor added to the GCM VENOM Creeper Scaler Conversion parts. The layout and setup is identical to the rear-motor mounting for the AXIAL motor plate.

All the included components are shown below.

AXIAL motor plate shown below,

VENOM motor plate shown below,

Please see the shopping page for pricing and availability.